Search

Our Story

Our Leather

Our Styles

Our Features

Our Customisation

Our Guarantee

We sell many different styles of watch straps and it may be hard to keep track of how they are all different from each other. Here's a quick rundown of their key features.

Do note that strap styles are a highly personal thing - what works for you might not work for someone else. Hence we do not have a definite suggestion on what style you should get. We hope that the photos and description will give you a better idea!

If you have any suggestions on styles we should make, please get in touch and let us know!

Signature

Our Signature style is the classic, quintessential watch strap that comes stock on most watches. Fully stitched all along the perimeter of the strap, tapered padding, fully lining and finished edges. Due to the padding, these straps are typically stiffer initially, but quickly wear in with just a few hours of wear. The padding gives the strap a sturdier feel. Signature straps pair best with watches of a moderate thickness.

Thickness: 4.5mm tapered to 2mm

Stitching: All around, 2.7mm width 

Thread: 0.35mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Slim

Our Slim style is almost identical to the Signature style with one key difference: no padding. The strap is uniformly thin throughout, which makes it very soft and pliable from Day 1 with no break-in required. It is very lightweight and comfortable to wear, and suitable for watches that have a thinner profile and for vintage watches.

Thickness: 2.2mm

Stitching: All around, 2.7mm width

Thread: 0.35mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Side-Stitch

Side-Stitch style does not have stitching running down the sides. Instead, stitching is used selectively at critical stress points (lug area, buckle area) to ensure that the strap is still structurally good to wear for the long term. Unlike some of the minimal stitching styles on the market, our Side-Stitch style still has lining leather as it gives a certain structure to the strap and prevents it from becoming too floppy with use.

Thickness: 2.2mm

Stitching: At the sides only

Thread: 0.55mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Chunky

As the name suggests, our Chunky style is for larger watches. We created this strap to pair with divers, Panerai, Bell & Ross watches that require a heftier strap to go with the hefty cases of those watches. The straps are made with wider keepers, and a heftier buckle. We prefer to craft Chunky styles with veg-tan leather that have a rustic vibe.

Thickness: 3.0mm

Stitching: All round, 3.85mm width

Thread: 0.55mm linen thread

Buckle/Strap Holes: Wide buckle / Oval strap hole

Chunky Signature

Simialr to our Chunky style, the Chunky Signature is made for larger watches like divers, Panerai etc. The Chunky Signature has an added padding compared to the Chunky.

Thickness: 5.5mm tapered to 3.0mm

Stitching: All round, 3.85mm width

Thread: 0.55mm linen thread

Buckle/Strap Holes: Wide buckle / Oval strap hole

Pilot

If you own a Pilot/Aviator style watch (e.g. IWC), this is the strap style for you. Comes with two brushed steel rivets towards the lug, along with a sharp taper and ending with a trapezium strap end style.

Note: Lug taper has to be at least 4mm (eg. 22-18mm) to have the sharp taper in the strap.

Thickness: 2.5mm

Stitching: All round, 2.7mm width. Added accent side-stitch and triangle stitching at the top.

Thread: 0.35mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Two-Tone Rally

We wanted to have a little fun and play with colours, and the Two-tone Rally style was born. The idea is to have two colours present on the strap. The primary colour would be the colour of the top leather, while the secondary colour would be the colour of the stitching, padding, keeper and edge paint. Unlike a normal Rally strap, the holes do not go all the way through the strap. Instead, they are only present on the top leather, showcasing the padding colour underneath.

Thickness: 4.5mm tapered to 2mm.

Stitching: All round, 2.7mm.

Thread: 0.35mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Two-Tone Stripe

We were inspired both by the Two-Tone Rally strap and NATO style straps in the market today, and decided to have a stab at making our own Two-Tone Stripe straps. The results have been stunning and full of possibilities.

Adding a middle stripe of leather allows for endless combinations. Couple that with different coloured stitching, edge paint, keepers and lining, and you could match any colour accent that's on your watch.

Thickness: 2.2mm

Stitching: All round, 2.7mm.

Thread: 0.35mm linen thread

Buckle/Strap Holes: Regular buckle / Round strap hole

Search