Black Barenia Signature Strap
Chat with us now
The quintessential leather strap. Barenia leather from Haas tannery in France is widely used by Hermes, and Hermes doesn't just choose any leather to use. It only uses the best. This is the same Barenia that Apple uses for its Apple Watch strap, and Hermes for its Birkin bag.
Barenia leather is soft and supple, with just the right firmness. It has a very smooth surface, with just a tiny bit of gloss. Closer inspection can reveal the beautiful grain on this leather. It has moderate scratch resistance which means you don't need to baby the strap. Small scratches can be buffed out with just some slight rubbing. This also means that Barenia is able to develop a beautiful patina that results in a slight darkening of the leather with use.
Specifications
What's Included
Strap Length Guide
Basic Sizing Guide
There are two sides per strap, which we refer to as the long end and the short end, which are represented by C and D respectively in the diagram below.
Our handcrafted leather straps come in 3 different lengths.
- Small (C: 105mm, D: 65mm)
- Medium (C: 115mm, D: 70mm)
- Large (C: 125mm, D: 75mm)
A quick way to decide on the length to get is based on your wrist size. Here is the general recommendation (if you are between sizes, we recommend to size up):
- Wrist size of 14.5cm - 17.0cm: Small
- Wrist size of 16.5cm - 19.0cm : Medium
- Wrist size of 18.5cm - 21.0cm: Large
If you need a strap that is shorter than Small (105/65), or longer than Large (125/75), you can always have the strap custom made.
Â
| Measurements | Description | S | M | L |
|---|---|---|---|---|
| A | Lug width | Varies by lug width (see product listing) |
||
| B | Buckle width | |||
| C | Long strap length | 105mm | 115mm | 125mm |
| D | Short strap length | 65mm | 70mm | 75mm |
| E | Distance to middle hole | 63mm | 71mm | 81mm |
| F | Distance between holes | 6mm | ||
| G | Size of holes | 1.8mm | ||
| Number of Strap Holes | 7 | 7 | 7 | |
Â
Advanced Sizing Guide
We are now running a trial on split size ordering. This is only recommended if you are more experienced with how leather straps wear on your wrist, and you know the specific length of straps that you require on both the long and short end.
For example, you might currently have a Medium size strap on your watch (115mm and 70mm), and you notice that the buckle sits in the middle of the wrist, but the long end of the strap is too long and can be seen when the watch is on your wrist. In such a situation, you may need a long end that's shorter than 115mm, but the buckle end of the strap should remain unchanged at 70mm. In this case, you might want to order 105mm/70mm instead of the standard 115mm/70mm.
If you are unsure what length you require for each side of the strap, we recommend sticking with the three standard sizes, Small, Medium and Large.Â
Â
Hope this quick guide helps! Finding the perfect length to get can be a little bit more complicated, as it also depends on the lug-to-lug distance of your watch, and even the shape of your wrist. For a more detailed guide on sizing, please check out this page.Â
Find Your Lug Width
If you're looking to purchase a strap for your watch, you will need to know the lug width of your watch. Lug width refers to "A" in this schematic below.
There are two ways to find out the lug width of your watch.
- Firstly, you can Google "<watch brand and model> lug width" and see if there is an answer from the brand's website, or some other websites.
- Alternatively, you can simply take a ruler and measure the lug width directly on your watch.
Lug widths are typically in whole numbers, and while the most common lug widths are between 18-22mm, they can go down to 8mm or up to 32mm even. Our ready stock straps are available in 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm and 26mm. If you need other lug widths, you can have it custom made.
You will then need to purchase a strap of the same lug width. For example, if your watch has a lug width of 20mm, you will need to purchase strap with a width of 20-16.
Note: Our Widths typically have two numbers, for example 20-16. The first number (20) refers to the lug width ("A" in the schematic above). The second number (16) refers to the buckle width ("B" in the schematic above). You just need to ensure that the first number matches the lug width of your watch.Â
Â
Â
Combination Tanned
Combination tanned is when the animal hides have been both chrome tanned and vegetable tanned, to achieve a combination of both tanning methods properties.
The matte finish on this leather matches perfectly with my titanium watch! The quick release bar was so worth it.
I ordered it and they sent it to the wrong address. Still waiting on them to make it right.
my only concern was I was charged an extra $40 for shipping into Canada. I understand this isn't in Delugs control, it was just frustrating and could discourage me from buying from delugs in the future.
Great
Good
