Sizing Guide
Sizing of watch straps can be a complicated thing. Let's un-complicate it.
*Unfortunately, only M size is available at this point in time.
Spring Bar Tool
$2.00
Need a spring bar to remove the strap or bracelet currently on your watch to put on a Delugs Strap? We got you. We have two versions - one is meant for straps, the other for bracelets.
The basic spring bar tool has two ends. One end is single-pronged, while the other end is two-pronged.
The advanced spring bar tool allows you to grasp both ends of the lug pins at the same time, which makes it so much easier to remove bracelets. It comes with 3 pairs of pins of varying sizes (1.0mm, 1.2mm, 1.6mm).
Note: The basic spring bar tool only ships out with a strap purchase. Do not purchase this on its own!
Related Items
Barenia Signature Watch Strap
$80.00
-
The quintessential brown leather strap. Barenia leather from Haas tannery in France is widely used by Hermes, and Hermes doesn't just choose any leather to use. It only uses the best. This is the same Barenia that Apple uses for its Apple Watch strap (check out that price!), and Hermes for its Birkin bag.
Barenia leather is soft and supple, just the right firmness, and has the perfect shade of brown. It has a very smooth surface, with just a tiny bit of gloss. Closer inspection can reveal the beautiful grain on this leather. It has moderate scratch resistance which means you don't need to baby the strap. Small scratches can be buffed out with just some slight rubbing. This also means that Barenia is able to develop a beautiful patina that results in a slight darkening of the leather with use.
All watch straps will come with a silver tang buckle and quick release bars, so that you can easily swap out between your favourite watch straps and not have to fuss about scratching your watch lugs. No one will judge you for changing straps every day!
-
For our Signature series, there are a total of 4 layers of various material that goes into each strap, with each layer serving a specific purpose. From top to bottom, they are: (1) exterior leather, (2) padding, (3) synthetic strengthener, (4) lining leather.
All layers are firstly glued and pressed together, before they are stitched. Finally, the edges are finished with edge paint, which adds an additional layer along the exposed edges of leather and protects it from wear and tear, and water damage, over time. This also prevents the different layers from separating - an additional layer of prevention on top of the stitching.
Horween Chromexcel Side-Stitch Leather Strap
$60.00
-
Our side-stitch watch strap in Horween Natural Chromexcel is something that we are so excited to release. This leather is the stuff of legends - perfect feel, great character, yummy look. When people say leather, Chromexcel is the image that pops up in your head and Horween is the tannery that you think of.
The Natural Chromexcel strap starts off in a beautiful medium brown colour. This leather has a pronounced pull-up effect. What this means is that as the leather stretches, the colour changes. This is due to the movement of the oil and wax inside the leather. What results is a leather strap that wears and ages beautifully, with a rustic and vintage vibe. Also, due to the high percentage of wax, any scratches can also be easily buffed out with just a simple brushing or friction from rubbing. The pull-up effect fades away over time and evens back out. All this contributes to a leather strap that you don't ever want to take off from your watch.
All watch straps will come with a silver tang buckle and quick release bars, so that you can easily swap out between your favourite watch straps and not have to fuss about scratching your watch lugs. No one will judge you for changing straps every day!
-
Construction here is kept simple. Two pieces of leather glued together, 3mm thick in total. The perfect thickness to give it enough structure, but still keep it slim. To secure the lug pins and buckle, the leather is skived to half the thickness and folded over on itself, before being stitched down at the sides. This keeps the thickness of the strap uniform throughout. The edges are burnished to seal the edges, which protects the leather from wear and tear, and water damage, over time.
Buttero Signature Watch Strap (MTO)
$70.00
-
Our signature watch strap in Buttero is the second item in our Signature line. Each strap is padded, lined and handstitched, using a veg-tanned leather that is extremely popular amongst leathercrafters. Being veg-tanned means that the strap is stiff to begin with, but within a few days of wear it will mould to the shape of the wearer's wrist. While all of the straps are identical to begin with, over the weeks, months and years of wear, the strap will quickly patina and become unique to the owner. What's patina? I'll let the folks over here tell you all about it. In a nutshell, more wear, more patina, more sentimental value.
All watch straps will come with a silver tang buckle and quick release bars, so that you can easily swap out between your favourite watch straps and not have to fuss about scratching your watch lugs. No one will judge you for changing straps every day!
Note: All Buttero straps are made-to-order and will take around 4 weeks before it is shipped out.
-
The main and lining leather used is Buttero from Conceria Walpier tannery in Italy.
See here for more details on the leather we use, because calling them "full grain leather" or "genuine leather" on its own does not do it justice.
-
There are a total of 4 layers of various material that goes into each strap, with each layer serving a specific purpose. From top to bottom, they are: (1) exterior leather, (2) padding, (3) synthetic strengthener, (4) lining leather.
All layers are firstly glued and pressed together, before they are stitched. Finally, the edges are burnished to seal the edges, which protects the leather from wear and tear, and water damage, over time.