Free Shipping For Your First Order

Use code FREE-FIRST-SHIPPING during checkout to enjoy free shipping for your first order with us. A minimum spend of US$100 applies.

Continue Shopping
Skip to content
Get the Perfect Fit: Introducing our Cut-to-Size Rubber Straps

Get the Perfect Fit: Introducing our Cut-to-Size Rubber Straps

Quick links:


Rubber straps have been available in the market for a time, and its qualities are time-tested and plain to see. Comfortable, durable, water-proof, easy to maintain - you name it. On the other hand, the options on the market have been plagued by various symptoms:

  • Excess bulk around the wrist, especially when paired with a tang buckle
  • Textures that don't necessarily pair well with a range of dials and case designs
  • Functional but crude shapes along the strap surface

It's not that more appealing versions aren't possible, it's just been the practice to keep it exclusive. Take Patek Philippe’s Aquanaut and Czapek’s Antarctique – not only are these straps designed specifically to complement the watch’s dial and case, they are:

  1. cut to the user’s size; and
  2. fit into specific deployants that can only be purchased with the watch.

That is to say, only owners of these particular watches would be able to enjoy them. The rest of us are left wondering, how does that actually feel? Could I have one of my own?

What was missing from the market was an option to pair your watch of choice with one of these customised, practical, and stylish options, no less at an affordable price. Emphasis on was.

Hearing the call, we’ve designed and made our very own Rubber Cut-to-Size (“CTS”) straps to bring all the above benefits to you. 

The Strap

Introducing the Rubber CTS straps in matte finish and in 7 colours.

Our CTS straps are made with the same high-quality FKM (fluoroelastomer) rubber used on our Tissot PRX rubber straps. Flexible and durable, these straps end the search for a true waterproof design that doesn’t lose any points in the style section.

Out of the box, these straps come in a maximum length, and can be adjusted to your preferred size. The Cut-To-Size process is easily performed by anyone with the most rudimentary of tools. You'll no longer have to spend time fiddling around with makeshift measurement tools, and doing guesswork on what actually fits your wrist. In just a few steps, you'll be able to cut it to your wrist's size, shape, and where exactly you want to place the clasp. 

Which brings us to the next big thing we're introducing along with the straps -- a spanking new deployant clasp. 

The Clasp

We've also taken the time to develop a deployant clasp to match the sleek new rubber. These are operable via a leaf spring mechanism which flips open and shut with satisfying tactile snap. More importantly, the cutting-to-size of the strap material means that there will be no overhang/excess tail to speak of, and no keepers in sight. What results is a clean, clearly tailored strap surface all around your wrist. 

These clasps will also come in a choice of silver, gold, rose gold, and black.

Last but not least, our standard quick-release mechanism has been integrated into these straps for the smooth strap changes that you’ve come to expect and love.

The result is a classy, comfortable fit designed to last through any, and we mean any, adventure you’re taking your timepieces through.

How to wear?

Different from your run-of-the-mill button-actuated deployants, the leaf spring deployant is secure by design and putting it on is as simple as:

  1. Pinching one side of clasp closed; then 
  2. Pinching the other side as the subtly curved base rests on your wrist.

Removal is even easier – simply pull upwards on either side, and the deployant springs open. 

Is this a little too easy? Will it open unintentionally? We’ve thought this through – the smooth lines and minimal design of the deployant reduce the chances for snagging onto surfaces that could potentially pull it open. The angle to open the clasp is also perpendicular to the usual forces that a strap is subject to, and makes accidental opening all the more unlikely. 

The leaf spring design, formed of 316L stainless steel, also maintains its strength through repeated, relentless usage, not to mention hold its own against sea water and rain. 

Before we begin...

Since this is probably your first time, we'll go through some basics and preparation. The cutting process is but a simple 3-step process. Say it with me: 

  1. Test
  2. Cut; and
  3. Check

The rubber straps you’ll be receiving will be a standard, maximum length. You’ll just have to cut where needed. But before we do all that, let’s make sure we’re on the same page with the different parts of the strap, and also what tools you’ll need for the job. 

The Straps:

  1. Main body
  2. Quick-release Spring Bars
  3. Cut-to-Size Segments ("CTS Segment")
  4. Deployant Clasp
  5. Spare side

You'll be receiving 3 'sides' of the strap. In the unlikely event that too much was cut away during this process, you'll have a spare ready to go. Alternatively if you got it right the first time, great! You now have an extra piece that you could perhaps use to customise to a watch of a different lug-to-lug dimension! 

Tools you’ll need:

  1. A soft surface to place your watch and other items down. A mousepad will do nicely, or a valet tray
  2. A pair of scissors, or a box cutter. If using the latter, do remember a cutting surface, like a clean chopping board, or a crafter’s cutting mat. 
  3. A thin tool to depress spring bars. A single-prong on a spring bar tool, or a tooth pick will get it done. 
  4. Your watch, with its existing strap removed. 


How to Cut to Size

Let’s get to it! Here's a quick video running you through all the steps. Scroll down further for a pictorial guide which you can refer to while performing the actual cutting. 

Once again, lets recap the 3 simple steps:

  1. Test the straps against your wrist;
  2. Cut the necessary number of Segments on either/both sides;
  3. Check if the strap fits.

Step one: Test

First, install the straps on your watch. The quick-release mechanism should make quick work of that. 

Next, place your watch face down on the soft surface, and place the top of your wrist against the case, palm facing up. Pull the straps up and over your wrist, overlapping them. Do it gently! Your wrist shouldn’t feel tugged or pulled at. This method will keep the watch centralised. 

As the deployant clasp holds the rubber ends quite close together, our aim is to cut just enough – such that the clasp sits snugly, (but not too tightly!) in the center of your wrist. 

The strap ends almost meet under the deployant

Remember to proceed cautiously. To do this, we cut close to where we need it, but not quite all the way. We can always cut again laterCount the number of holes you need to leave on each side, in relation to the CENTER of your wrist.

In the picture below, for example, it is likely you need to cut along the red dashed line for both straps. However, we would advise that you leave one segment more than you think you need, when doing your first cut, i.e. cut along the yellow dashed lines instead.  

At this juncture, you may note that you are most likely not cutting the same number of segments for both sides, even though the deployant is a butterfly style. This is completely normal. Human wrists are not symmetrical, and often require different lengths of strap on either side of the watch. 

Step two: Cut!

Make the initial cuts, and remember to cut along the groove! There’s nothing more to it. Count twice, cut once. If you’re unsure, cut one Segment at a time. 

Cut along the groove.

Step three: Check!

Time to install the deployant, and do our first check! Place each side of the strap down and install the included spring bars. Take care that the deployant is facing the correct direction (i.e. towards your watch/wrist).  

Place spring bar in the final hole. Install the strap onto the clasp, noting the direction of the strap and clasp. The spring bar should fall in with a click. 

Place the watch on your wrist, and close the deployant (shown here again, for your convenience). If this is your first time, do it slow so you don’t risk pinching yourself on the leaf spring. 

How’d it go? It is likely to be a little loose on this first attempt, but that only means you’re on the right track. Test and check the fit: shake your wrist, adjust the watch, hold the watch to your wrist, and flip your hand over to check the centralisation. 


All you need to do from now is to repeat the process. If it is too far skewed on one side, simply cut the other side only, one Segment at a time. 


That’s all there is to it! We hope you will enjoy your new strap for the years to come. 


One example of a snug, comfortable fit.  


What to be aware of (Common Issues)

Now, we very much understand that this will be a completely new and perhaps frightful experience for some, after all, each cut made is permanent. Which is why we're also packaging one additional strap for every purchase. In the unlikely event that a strap has been over-cut, this will serve as your backup. 

For those who complete the process with no hiccups, there is the possibility of using this strap to perhaps size the combination to:

  1. another user of your watch; and
  2. another watch entirely. 

We’ve also compiled some possible mistakes, and negative examples of what the end-result looks and feels like, so that you may avoid them: 

1. Overly tight - the clasp shows an excessive gap, and the strap pulls on the wrist. This happens when the user has cut too many segments away, often by mistakenly cutting too far on the first try. 

**Disclaimer: We do note that some of you do prefer a very snug fit, so don’t be afraid if you do see a slight gap between two sides. This is normal and does not affect the mechanism’s security.

2. Clasp not centralised on wrist - this may happen if you try to cut each side to an equal length in one go. This is not advisable as explained above, due to wrists not being symmetrical.



The straps will be offered in the following configurations: 

  • Lug-Buckle Widths: 18-16mm, 19-16mm, 20-16mm, 21-16mm, 22-18mm. 
  • Colours Available: Black, Navy, White, Olive Green, Dark Grey, Orange, Baby Blue
  • Clasp Style: CTS Deployant Clasp in Silver, Gold, Rose Gold, Black (no additional cost to change)

These straps will fit most watches that accommodate straight lug straps. 

Availability and Pricing

The Rubber CTS Straps will be available for order from 13 Jan 23. 

You may place your orders here.

Frequently Asked Questions

  1. What if I cut more than I should have? 
    We've included an additional strap (on top of a full set of 2 straps) on the off-chance that this happens. You can rest assured that if you follow the instructions above, there is very little chance that your experience will go wrong. If you do require an additional piece, do reach out to us.

  2. Must I cut the same number of segments on either side? The strap seems to fit even when I cut different numbers on each side.
    No, you don’t! Wrists come in a variety of shapes and widths, and this means that straps may actually need to be uneven in order for the butterfly-style clasp to sit comfortably on your wrist.

  3. After cutting, is there any way to adjust it for another watch?
    We’ve included a third strap for this exact reason! Typically, a different length is needed for one side of the straps if the lug-to-lug distance is different. All you need to do is take one of the existing sides which also works for you on the new watch, and trim the spare.

    This may admittedly be difficult if the lug-to-lug distance varies by a significant amount. For example, a Cartier Tank Large has a 19mm lug width, with a 33.7mm lug-to-lug distance. On the other hand, a Grand Seiko SBGH267 with the same 19mm lug width features a 47.4mm lug-to-lug distance. The disparity of 13.7mm (almost half an inch!) would place the butterfly deployant in a very different position on one's wrist. In this case, we would recommend purchasing a second set. 

  4. Will you be releasing more colours in future?
    Hopefully, yes! If there's a strong demand from the community for more colours, we will be happy to produce a wider variety too. If you do have suggestions on what colours we should add next, please let us know and we will look into it!

  5. Can I place a custom order using the same rubber on this strap? 
    No, rubber straps are not available for custom order, as these straps are made via injection molding, which require the use of specialised molds. 

  6. Can I buy the clasp separately? What if I want to change clasp colours between watches? 
    You can buy the clasps separately. Do note however that the clasp is designed to work only with our rubber CTS straps. 

  7. Will the clasp cause any issues for those of us with more hair?
    It is unlikely that the clasp will cause any issues, we've tested this ourselves! However, as with any metal mechanisms near skin, we advise taking some care while wearing the strap not to pinch yourself by accident. 

  8. How do I care for the rubber strap? 
    The FKM rubber is chemically stable, and is highly resistant to the elements. If it does happen to require cleaning, running it under water and cleaning with a cloth should do the trick! 

  9. Can I wear the strap to swim? 
    Definitely! Both the strap and the clasp are largely made of materials which do well in water, and even sea-water. However, we offer no guarantees as to the viability of your particular timepiece in water. As with any metal, prolonged exposure to water may cause issues, so we would advise drying and cleaning your watch and strap after any water activity. 

  10. What if my watch requires a larger diameter spring bar? (e.g. some Seiko divers, etc)
    Do indicate via the checkbox above during purchase to indicate if you will require the larger spring bar, and we will swap it out for your use! Do check out our article here for more information on whether you need this spring bar or not.

    You may also remove the existing spring bar (link here on how to do it), and use your own OEM spring bars, to ensure that there's an even more secure fit with your watch.

    As always, once the strap is mounted on the watch, do give it a few good tugs to make sure that the strap is properly installed, and that it won't accidentally fall off.

  11. Will the strap suffer from “case rub”, commonly seen in watches with short lug arms?
    We’ve seen no issues so far, do let us know if you do come across such instances in your experience. If you are considering curved lugs to combat this issue, do see our articles on curved lugs here, and yes our rubber strap can accommodate our quick-release curved spring bars

  12. Can I use these straps with a watch that requires curved lugs?
    Yes! While the strap does not come with curved lugs by default, the strap is able to accept our curved, quick-release spring bars, which you can purchase here. Here's a guide on how to perform the simple spring bar conversion: Converting Regular Straps to Curved Straps. Do note however that since the strap is not designed specifically for curved lugs, there may be a slight shortening of the strap's width once a curved spring bar is installed (e.g. 20mm may seem closer to ~19.5mm). 
    Check out a full review done on fitting the CTS strap on curved spring bars!

  13. Can I use these straps with my Apple Watch?
    Yes, however a caveat is that since our largest size for the Rubber CTS stands at 22mm wide, they can only be used with the Apple Adapter (ready to purchase here) for the smaller 40/41mm sized Apple Watches.

  14. How does the clasp work? Does it have any magnetic or other harmful parts that may damage my watch?
    The clasp relies on the deflection of a long metal bar built into the center of the clasp whenever the two wings are pulled open or shut. This solid bar provides security and rigidity when the clasp is shut, and the longevity for repeated use. There are no magnetic parts whatsoever that could risk harm to your mechanical movements! 

Your cart is currently empty.

Start Shopping