Overstock: Matte Grigio Lizard Stitchless Strap

There are two sides per strap, which we refer to as the long end and the short end, which are represented by C and D respectively in the diagram below.

Our handcrafted leather straps come in 3 different lengths.

1. Small (C: 105mm, D: 65mm)
2. Medium (C: 115mm, D: 70mm)
3. Large (C: 125mm, D: 75mm)

A quick way to decide on the length to get is based on your wrist size. Here is the general recommendation (if you are between sizes, we recommend to size up):

• Wrist size of 14.5cm - 17.0cm: Small
• Wrist size of 16.5cm - 19.0cm : Medium
• Wrist size of 18.5cm - 21.0cm: Large

If you need a strap that is shorter than Small (105/65), or longer than Large (125/75), you can always have the strap custom made.

Hope this quick guide helps! Finding the perfect length to get can be a little bit more complicated, as it also depends on the lug-to-lug distance of your watch, and even the shape of your wrist. For a more detailed guide on sizing, please check out this page.

If you're looking to purchase a strap for your watch, you will need to know the lug width of your watch. Lug width refers to "A" in this schematic below.

There are two ways to find out the lug width of your watch.

1. Firstly, you can Google "<watch brand and model> lug width" and see if there is an answer from the brand's website, or some other websites.
2. Alternatively, you can simply take a ruler and measure the lug width directly on your watch.

Lug widths are typically in whole numbers, and while the most common lug widths are between 18-22mm, they can go down to 8mm or up to 32mm even. Our ready stock straps are available in 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm and 26mm. If you need other lug widths, you can have it custom made.

You will then need to purchase a strap of the same lug width. For example, if your watch has a lug width of 20mm, you will need to purchase strap with a width of 20-16.

Note: Our Widths typically have two numbers, for example 20-16. The first number (20) refers to the lug width ("A" in the schematic above). The second number (16) refers to the buckle width ("B" in the schematic above). You just need to ensure that the first number matches the lug width of your watch.